Manufacturer: GoPro Camera
This kit includes a glass Protective Lens that fits over your GoPro camera lens to help guard against dirt, dust, and scratches while using the camera outside the housing. Itâ€™s perfect for use with The Frame1 or handheld shooting with just the camera. Also includes a camera lens cover, Standard Housing lens cover, replacement battery door and replacement side door for your camera.
Features: 1. Quick release plate: attach and detach your camera in seconds. 2. Cunter weight hook: allows you to hang additional weight and increase the stability at the same time. 3. Non-slip rubber feet: designed for increased stability. 4. Monopod Conversion: one of the tripod leg can be converted to a monopod, adding more versatilly. Specifications: Model Number: ZOMEI Z669 Material: Magnesium Aluminum Alloy Head Type: Ball Head Quick Release Plate: Yes Panoramic Angle: Horizontal 360Â° Net Weight: 3.7 lbs/ 1.68 kg Load Capacity: 15 lbs/ 7 kg Folded Length: 14 inches/ 37 cm Max Height: 60 inches/ 152 cm Leg Sections: 5 Leg Lock Type: Twist Lock Package Include: 1 * Zomei Z669 Tripod With Ball Head 1 * Ball Head Pouch 1 * Tripod Carrying Case Note: For camera with telephoto zoom lens, you need to buy a tripod mount ring additionally for better balance
Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate for Bogen/Manfrotto Tripods with a ZAYKiR Veido Plate
Quick-release adapter for convenient removal of camera Plate slides 2 inches Compatible with most Bogen/Manfrotto tripods Compatible with the 501PL camera plate (supplied with the head 501HDV, 503 and 519 Video Heads) and the special 501PLONG accessory plate. This Quick Release adapter gives you the freedom to remove the camera from the head without detaching it from the plate and put it on any other support. Supplied with 1/4'' and 3/8'' camera screws.
This head is the perfect synthesis between and innovative "Bridge Architecture" and manfrotto's Cutting edge engineering. A pan fluid drag system gives more ergonomic operation while a wider top plate and longer sliding plate offer extra stability and balance. This head offlbs @mmers an even more rigid structure for maximum precision and improved responsiveness. The built in easy link connectors offer extreme flexibility for accessory attachments. The counterbalance system and ball bearing drag sysem both offer precision and smoothness of operation. This head has been carefully constructed from lightweight modern materials for optimal balance of strength and size. Technical Specifications: Max Payload 13.2lbs; CSB 8.8lbs@55mm; FDS pan variable cartridge; FDS tilt variable cartridge; Tilt range +90Â° / -85Â°; Camera fixing quick release; Top plate 140mm 5.5 inches; Height 5.1in.; weight 3.5lbs.
Magnus VT-4000 Professional High Performance Tripod System with Fluid Head
Model: VT-4000 VT4000
Supports loads up to 8.8 lb (4 kg) Features a 65mm ball base Two-way fluid head for smooth motion Fixed counter-balance spring set to 3.3 lb (1.5 kg) provides smoother tilt movements 2-stage design allows you to adjust the height of the tripod from 27.6" to 59" (70 to 150 cm) Middle spreader provides enhanced stability by holding the tripod legs in locked position Provides fixed counter balance, pan, and tilt drag Allows you to leverage the slide range of +20 / -25mm to enable travel capabilities - essential in balancing uneven configurations Provides camera mounting via a slide plate that can be attached via a 0.25" (6.35mm) screw with video pin Offers tilt angle adjustments from +90Â° to -60Â° Ground spikes for outdoor use and convenient retractable rubber feet for delicate floor surfaces Weighs 7.9 lb (3.6 kg) General: Load Capacity: 8.8 lb (4 kg) Maximum Height: 59.0" (150 cm) Minimum Height: 27.6" (70.1 cm) Folded Length: 30.3" (77 cm) Leveling Bubble/Illuminated: Yes/no Weight: 7.9 lb (3.6 kg) Head: Counter Balance System: Fixed counter-balance spring @ 3.7 lb (1.7 kg) Quick Release/Wedge Plate: Yes/no Balance Plate: Yes Slide Range: +20/-25mm Tilt Drag: Yes Tilt Range: +90Â°/-60Â° Tilt Lock: Yes Pan Lock: Yes Legs: Head Attachment Fitting: 65mmm half bowl Material: Anodized aluminum Leg Stages/Sections: 2/3 Leg Lock Type: Flip locks Independent Leg Spread: No Spiked/Retractable Feet: Yes/yes Center Brace: Yes [mid-level]
Manfrotto MVH500AH 755CX3 Lightweight Fluid Video System with Carbon Fiber Legs and Bag (Black)
The lightweight fluid video system MVH500AH,755CX3 includes the fluid video head (flat base) MVH500AH and the MDeVe Carbon Fiber Tripod 755CX3. The MVH500AH is a lightweight head with a wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11 lbs.) of equipment. It's the most compact head in our successful Bridging Technology range and it also replaces the Manfrotto 701HDV video head. Beautifully smooth shots: the 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above. The 500 has a pre-set counterbalance of 2.4kg (5.3 lbs.), but is able to support equipment of up to 5kg (11 lbs.). The 500 has one Easy Link 3/8" connector to allow an external monitor or other accessory equipment to be fitted. The 755CX3 Carbon Fiber MDeVe tripod is a hybrid two-stage (or 3-section), carbon fiber single leg-tube tripod that's compact and lightweight. It has a flat head plate, but a built-in MDeVe 50mm half-ball leveling system (locked by a rotating grip at the bottom of the center column), which allows the camera operator to level the camera without needing to make micro adjustments to each individual tripod leg. Tension-adjustable flip leg levers make setting up and packing away the tripod fast and easy. Supplied with padded carrying bag. Specifications Closed Length 28.74 in Maximum Height 68.11 in Maximum Height (with Center Column Down) 58.27 in Minimum Height 22.05 in Load Capacity 11.02 lbs. Weight 6.53 lbs.
Manfrotto MVH500A Pro Fluid Head with 60mm Half Ball (Black)
The MVH500A is a lightweight head with a wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11 lbs.) of equipment. It's the most compact head in our successful Bridging Technology range. MVH500A is supplied with a 60mm half ball video tripod mount and it also replaces the Manfrotto 701HDV video head. Beautifully smooth shots: the 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above. The 500 has a pre-set counterbalance of 2.4kg (5.3 lbs.), but is able to support equipment of up to 5kg (11 lbs.). The 500 has one Easy Link 3/8" connector to allow an external monitor or other accessory equipment to be fitted. Specifications: Attaches By 1/4" and 3/8" attachment type Attachment 3/8" screw attachment type 1 Bubble Spirit Level Front Tilt -70 Degree / +90 Degree tilt range Head Bowl 60mm Independent Pan Lock Independent Tilt Lock Lateral Tilt -70 Degree / +90 Degree tilt range Maximum Working Temperature 140 Degree F Minimum Working Temperature -4 Degree F 2 Pan Bar Positions 1 Pan Bar Included Pan Drag fluid cartridge with fixed drag Panoramic Rotation 360 degrees QR Plate Type 500PLONG Secondary Safety System Spring Loaded Counter Balance Tilt Drag fluid cartridge with fixed drag Weight 2.47 lbs. Working Height 4.96 in
Magnus VT-300 Video Tripod with Fluid Head is a lightweight and portable tripod system for shooting stable videos with DSLRs, small camcorders, and any other cameras up to 15 lb.
A built-in fluid effect video head pans a full 360Â°, tilts up and down, and features independent pan and tilt locks for fixed-position shots. A pan bar and a snap-in quick-release camera plate are included. The quick-release plate features a 1/4" camera mounting screw, a registration pin, and an anti-skid mounting surface.
A center-column raises or lowers at the turn of a hand crank to let you fine-tune a height without adjusting the tripod legs. A mid-level spreader keeps the legs steady when you adjust the tripod, and it locks to keep the legs secure once you've set the tripod in position. Both the center-column and spreader are integrated. The maximum height of the tripod with the center-column raised is 64.3".
The tripod legs extend at two leg stages at the release of flip-locks. The legs feature replaceable rubber feet that provide grip on hard or slippery surfaces. An internal bubble level will help you position the tripod evenly on uneven ground. A carry case with a shoulder strap is included and will let you conveniently carry the tripod over your shoulder when you're travelling about."