Mounting Hardware - 27 - Page 5 - Extreame Savings! Save up to 44%
Extreame Savings! Up to 44% off on Mounting Hardware at Come As You Arts, Page 5. Top brands include Fixinus, Kupo, Finex, Impact, LimoStudio, Focus Camera, pangshi, Manfrotto, Simple Studio, Intermatic, Avenger, & Neewer. Hurry! Limited time offers. Offers valid only while supplies last.
Fixinus Rapid Baby Adapter 5/8 Inches (16mm) Stud with 1/4 Inches-20 Male Thread
mpn: 3082, ean: 6168973370460,
4.9 out of 5 stars with 61 reviews
Fixinus Rapid Baby Adapter 5/8 Inches (16mm) Stud with 1/4 Inches-20 Male Thread This Adapter consists of a baby receiver with a 1/4''-20 thread attached to the top of it that can be mounted on any baby stud with a set screw to lock it firmly in place. SPECIFICATIONS Thread Size: 1/4''-20 Attachment Size: 5/8'' (16 mm)Construction: AluminumLength: 2.19 in (55 mm)Weight: 3.30 oz (93 g) What You Will Get Fixinus 1 pack of Multifunctional Mounting Bracket Adapter Worry-free Warranty At Fixinus,
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312
You Save: 25%
mpn: KG006312, ean: 0796594128076,
4.6 out of 5 stars with 29 reviews
The KG006312 Stand Adapter enables you to mount a light fixture or accessory with a baby 5/8 (16mm) receiver to any stand with a junior 1–1/8 (28mm) receiver, such as the Kupo Master C Stand with Turtle Base. It's perfect for mounting a light fixture or accessory low to the ground. Solid steel construction gives it superior strength. The bottom of the adapter has a safety pin hole drilled through it if hanging it from a coupler or clamp with a junior receiver.Only products purchased from
Impact Atom Clamp with Ratchet Handle
mpn: ME100, ean: 0847628540248,
4.4 out of 5 stars with 64 reviews
The Impact Atom Clamp is a smaller version of the popular Impact Super Clamp. Weighing in at a mere 4.0 oz, the Atom Clamp can support a payload of over 15 lb. This, and the fact that it comes with 1/4''-20 and 3/8'' female sockets, makes it ideal for use with most standard camera and grip accessories. It's ideal for small sets or tabletop photography. The Atom Clamp is made of lightweight aluminum and features a textured, non-slip jaw grip that is optimized to work with poles or flat objects.
LimoStudio 3 Section Double Articulated Arm Camera Mount Bracket, 5/8" Stud with 3/8" Screw Thread Hole
You Save: 9%
mpn: PPH305(1), ean: 0757764150464,
4.6 out of 5 stars with 18 reviews
Photography 3-Section Double Articulated Arm Aluminum Polymer Material 5/8'' Stud 4.5kg Loading Capacity 12 Inch Each Section Arm 3/8'' Screw Thread Hole Compatible with Photo Super Clamp[1 x] 3 Section Double Articulated Arm. 5/8'' Stud & 3/8'' Screw Hole. 12'' Each Section. Angle Adjustable. Compatible with Super Clamp.
Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)
You Save: 25%
mpn: KCP200B, ean: 0847628552210,
4.9 out of 5 stars with 44 reviews
The Impact Grip Head for Lights and Accessories - 2.5'' Diameter (Black) mounts lights, light modifiers, scrims, flags, cutters, and other lighting accessories onto C-stands or butterfly frames. When trying to get the perfect shot, you often have various lighting accessories such as flags, scrims and cutters set up around your subject. A grip head holds each in a precise position, making it a fairly common piece of equipment on most any set.Wide compatibility with standard grip equipment; fits
Kupo 40-Inch Extension Grip Arm with Big Handle - Silver, KG203412
mpn: KG203412, ean: 6954016521650,
4.0 out of 5 stars with 225 reviews
The 40 Grip Arm with Big Handle, KG203412 is a 2 1/2 grip head mounted on the end of a 40 piece of steel tubing 5/8 (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2 grip head consists of a pair of rotating aluminum discs attached to a 5/8 (16 mm) receiver. The discs have four different sized V shaped jaws to accept any accessory with a 5/8, 1/2, 3/8 or 1/4 mounting stud or tubing. The V shaped jaws have
Manfrotto Nano Clamp 13mm-35mm with 3/8inch & 1/4inch Receiver
You Save: 7%
mpn: 386B-1, ean: 0719821379607,
4.0 out of 5 stars with 35 reviews
The Manfrotto 386B-1 Nano Clamp is a tiny but powerful black aluminum clamp. It weighs only 4.4 oz and featuring a ratcheting aluminum handle, the Nano Clamp can support a load of up to 8.8 lb. The clamp features a redesigned gripping surface, patented unexposed thread system and high friction tape which improves the grip on pipe, poles and tubes. This, and the fact that it incorporates 1/4''-20 and 3/8''-16 female taps, makes it well-suited for use with a wide variety of lighting gear.
LimoStudio Photography Lighting Stand Flash Magic Clamps with Flex Arm, AGG1160
mpn: AGG1160, ean: 0616469535153,
4.4 out of 5 stars with 56 reviews
(1) x LimoStudio Lighting Stand Flash Magic Clamps with Flex Arm Height adjustable: 21''Goose neck Diameter: 1/2'' Material: Premium aluminum alloy Heavy duty clamp at one end for attachment to tube or thick object(1) x LimoStudio Lighting Stand Flash Magic Clamps with Flex Arm. Height adjustable: 21'' Sturdy Goose Neck. Diameter: 1/2''. Material: Premium aluminum alloy. Heavy duty clamp at one end for attachment to tube or thick object.
Simple Studio (TM) Profoto to Bowens Speedring Adapter
4.3 out of 5 stars with 212 reviews
Converts a Profoto speedring strobe mount into a Bowens mount for all compatible Bowens accessories such as soft boxes. Compatible for all Profoto Mount Studio Flash StrobeUse Bowens accessories with your Profoto Strobe. Compatible with all Profoto Mount Strobes.
Kupo 5/8 Inches (16mm) Receiver with 3/8 Inches-16 Thread KG004611
You Save: 2%
mpn: KG004611, ean: 6954016520455,
4.9 out of 5 stars with 166 reviews
This adapter consists of a baby receiver with a 3/8''-16 thread attached to the top of it that can be mounted on any baby stud with a set screw to lock it firmly in place.Only products purchased from authorized dealers such as Amazon.com are eligible for an extended 3 year warranty. 5 years in all..
Manfrotto 016 Adapter Converts Standard 5/8" (16mm) Female Light Stand Tip to 1/4" x 20 Thread on a 12mm Shaft.
You Save: 19%
mpn: 16, ean: 0719821153887,
4.2 out of 5 stars with 19 reviews
This Manfrotto Broncolor Adapter, Converts a 5/8''Female to a 3/8'' Tip with 12mm Shaft. This replaces the Manfrotto 3100. Attachment: 1/4'' screw; attachment 2: 5/8'' female; color: silver; length: 3.90 in. material: zinc steel; weight: 0.31 lbs.Manfrotto 016 Broncolor Mounting Adapter - Manfrotto 1 Year Warranty. Attaches By: 1/4'' screw attachment type. Attachment (Top): 5/8'' female attachment type. Material: Zinc steel. Length: 3.9'' / 9.91cm.
Intermatic EK4236S Select Grade Fixed Mount Electronic Photocontrol with Stem, Swivel and Side Lens
You Save: 25%
mpn: EK4236S, ean: 0078275146303,
4.7 out of 5 stars with 31 reviews
Are you installing light fixtures with extended life expectations? Intermatic's electronic photocontrols are designed to match the long life of new LED lighting fixtures with a 10 to 20 year service life expectancy. This allows full realization of both the cost savings and benefits of maintenance-free lighting installations. The EK4236S Fixed Mount Electronic Photocontrol by Intermatic has been designed, tested and warrantied for long life. It has improved on/off switching with high quality
Impact 6" End Jaw Vise Grip
You Save: 41%
mpn: ME106, ean: 0847628556164,
4.9 out of 5 stars with 35 reviews
The Impact 6'' End Jaw Vise Grip provides strong, solid gripping of round, square, or rectangular tubing and many other common or irregular shapes. At one end of the steel shaft are the fixed end jaws and at the other a 5/8'' Baby pin for mounting fixtures or other grip items.Construction: Shaft: 1010 chrome-plated steel, Jaws: aluminum alloyDimensions: Actual jaw width: 8.0'' (20.32 cm)Weight: 1.5 lb (0.68 kg)5/8'' Baby Pin. Steel and Aluminum Alloy Construction. Ergonomic Handle Design.
Manfrotto 196AB-2 2-Section Single Articulated Arm without Camera Bracket (Black)
You Save: 11%
mpn: 196AB-2, ean: 5554442284214,
4.8 out of 5 stars with 27 reviews
This single articulated arm with two sections is a great studio tool. The fully adjustable design has many uses, from lighting to gobos or whatever you can thing of. Top attachment with a 16mm spigot 3/8-Inch light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4-Inch thread. Arm tube diameters: 13mm.; attachment (bottom): color: black; load capacity at maximum extension: 3.31 lbs.; material: aluminum; maximum length: 23.82 in.; 2 sections;
Browse Our Catalog